One | m+


One | m+ Onem+ Onemplus 1mplus 1m+
mib logo vertical colour 1

Size and Weight


68 mm (2.68 inches)

25 mm (0.98 inches)

38 grams (1.34 ounces)

Laser Range


Advised range of scope
0 to 3m (0 to 9.84 feet)

Visible Laser Range 3
visible up to 7.3km (4.53 miles)

Package Contents

One | m+ Unit – black

Universal Clip (wall, body, belt, jogging top, etc)

Dual affix Metal Disc (35mm) – 3M tape backed

25mm Split Ring for keyring attachment

1m USB micro charge cable – “+ a handy measuring guide”

Power and Battery


Battery Capacity
500 mAh

Battery Type
Built-in rechargeable Lithium-Ion Polymer (LiPo) battery

Typical Usage Duration
3 days (typical)

Continuous Runtime
12 hours

Full-charge time
2 hours

Typical Charge time
Up to 50% charge in 30 minutes with a >5W charger

Temperature Environments

Recommended Operating Temperature
0º to 35º C (32º to 95º F).

Low- or high- temperature conditions might cause the device to change its behaviour to regulate its temperature

Ambient Operation (Cold)
Using One | m+  in very cold conditions outside of its operating range may temporarily shorten battery life and could cause the device to turn off.

Battery life will return to normal when you bring the device back to higher ambient temperatures.

Ambient Operation (Hot)
Using One | m+ in very hot conditions can permanently degrade and shorten battery life.

Storage Temperature
Store the device where the temperature is between -20º and 45º C (-4º to 113º F).
Don’t leave the device in your vehicle as temperatures in parked vehicles can exceed this range.

Laser Specifications


Laser Wavelength
532 +/- 20 nm

Output Power
Factory Definable  >0.99 up to 4.99 mW


One m plus Line Lite Technology Logo

Custom engineered laser drive system
delivering reduced power requirement
optimises runtime duration by up 10X vs similar laser devices
no loss in output intensity throughout operation.

External Buttons
and Connectors


Attachments and
guide markings

Untitled 1

The universal clip system is design to operate in many ways
There are 3 parts to the clip –

1. Integrated Clip
2. Keyring Clip
3. Fastener

These parts allow augmentation for fixing to and use with …
… belts … jackets … training tops … hoodies … T-Shirts … wall/table steady … keyring …

Untitled 2

1.  Size and weight vary by configuration and manufacturing process.

2. Recommended range is based on ease of use in confined conditions so as to minimise annoyance to others.
At present no recommended social distancing is greater than 2m.

3. The range stated for maximum visible range is derived from 4.99 mW Class 3R laser with tight beam (0.5 milliradian divergence).
The laser used is a factory definable laser of between 0.99-4.99 mW with a less tight beam (above 1 milliradian divergence) and therefore has shorter maximum viewable distance.
For safety we have taken the worst case scenario to highlight laser safety. More information on laser safety can be found here on our site

4. All battery claims depend on many other factors; actual results will vary. Battery has limited recharge cycles and may eventually need to be replaced by Tessellated Industries or an approved service partners. Batteries within warranty and found to be defective will be replaced under warranty, some costs may be incurred by the owner. Damage to the unit, battery or any signs of misuse or abuse will deem the warranty null and void.
Outside of the warranty period Tessellated Industries reserves the right to change the battery. Battery life and charge cycles vary by use and environmental factors the unit has been submitted to.

The stated capacity is the nominal capacity of the battery. The minimum capacity is ≥480 mAh.

Testing conducted by Tessellated Industries in July 2020 using pre-production One | m+ units and bundled cable with 3rd Party accessories, powerbanks and adapters (Apple USB‑A 12W 2.4A Model A1401, Anker A1277 IQ 3A capable, Samsung EP-TA20UWE 2A Fast Charger, Logitech A/11672EA 1A charger, Sensio Kengo 2.1A wall unit, BG Electrical double switched wall socket 3.1A 15.5W fast charge). Charge testing conducted with drained One | m+ units. Charge time varies with environmental factors; actual results will vary.

5. class 2 and class 3R/IIIa  factory adjustable based on geographical market regulations, areas of usage and requirement stipulations. Check label on the product for classification

Specifications are correct at time of writing and subject to change at anytime without prior notification.

Home>One | m+ Specifications